Textile Printing Thickener---Sodium Alginate LV / MV / HV
Model Number: Printex L10 L20 M4 H4 H5 H6 H7
Product Origin: China
Brand Name: Printex LV MV HV (Sodium Alginate)
Other Price Terms: USDFOB
Payment Terms:
Supply Ability: 1500MT/year
Minimum Order: asper need
Delivery Lead Time: prompt
Quality/Safety Certifications:
Product Origin: China
Brand Name: Printex LV MV HV (Sodium Alginate)
Other Price Terms: USDFOB
Payment Terms:
Supply Ability: 1500MT/year
Minimum Order: asper need
Delivery Lead Time: prompt
Quality/Safety Certifications:
Textile Printing Thickener---Sodium Alginate (Printex L10 L20 M4 H4 H5 H6 H7)
Appearance: Brownish Powder
Stock Thickening Content Ratio: ca 4%
Fluidity: Long
Shear Stre Sensibility: Low
PH: 6.5---7.5
PH Range Stability: 5---10
Moisture: 12% approx.
Solubility: Cold Water Soluble
Filtered Grade: High Purity for Rotary Screen Printing
Ionic Character: Anionic
Sodium Alginate can be combined in any ratio with other Thickeners such as Printex ST, Printex C5, Ether Starch, CMC, British Gum, Guar Gum, Tamarind Gum, Synthetic Polymers etc depending on the quality of fabric and printing machine, as well as kinds of Dyestuff.
Packing: 25Kgs bag of net each.
Factory: Chem-Thickeners (Algin) Plant.
Textile Printing Thickener---Printex HV
---Printex HV is a high viscous, filtered technical Sodium Alginate based Textile Printing
Thickener designed applying for printing with Reactive Dyes on cotton, and also for printing
with Disperse / Reactive dyes on Polyester / Blends.
---Printex HV is suitable for Flat Bed Printing and Rotary Screen Printing.
Properties
---High colour yield and penetration
---good sharpne and levelne
---stable viscosity under high shear conditions
---excellent eash-off properties
Product
---Appearance Yellowish to light brown powder
---Filter grade High purity
---PH 6.5---7.5
---Moisture 12% max
---Solubility Cold water
---Viscosity 95,000+/-3,000cps (4% solution)
Measured with Brookfild RVF, at 25 C, Spindle No.6, 20 RPM.
Application
---Printex HV can be combined in any retio with other Thickeners such as Modified Starch,CMC,
some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.
---Stock Thickening Preparation
Printex HV 4Kg
Water 96Kg
Stock Thickening 100Kgs
---Printex HV is added to water while stirring with high speed stirrer,which takes about 1-2 minutes
until the viscosity increases.
---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.
Remark: Printex HV diolves easy in cold water, if diolved in water with hardne of 12.5E, additional
of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution
should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)
Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.
Storage
---Should be stored in a dry and cool place to maintain best product performance.
Textile Printing Thickener---Printex MV
---Printex MV is a medium viscous, filtered technical Sodium Alginate based Textile Printing
Thickener designed applying for printing with Reactive Dyes on cotton, and also for printing
with Disperse / Reactive dyes on Polyester / Blends.
---Printex MV is suitable for Flat Bed Printing and Rotary Screen Printing.
Properties
---High colour yield and penetration
---good sharpne and levelne
---stable viscosity under high shear conditions
---excellent eash-off pro[erties
Product
---Appearance Yellowish to light brown powder
---Filter grade High purity
---PH 6.5---7.5
---Moisture 12% max
---Solubility Cold water
---Viscosity 35,000+/-3,000cps (4% solution)
Measured with Brookfild RVF, at 25 C, Spindle No.6, 20 RPM.
Application
---Printex MV can be combined in any retio with other Thickeners such as Modified Starch,CMC,
some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.
---Stock Thickening Preparation
Printex MV 4Kg
Water 96Kg
Stock Thickening 100Kgs
---Printex MV is added to water while stirring with high speed stirrer,which takes about 1-2 minutes
until the viscosity increases.
---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.
Remark: Printex MV diolves easy in cold water, if diolved in water with hardne of 12.5E, additional
of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution
should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)
Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.
Storage
---Should be stored in a dry and cool place to maintain best product performance.
Textile Printing Thickener---Printex LV
---Printex LV is low viscous, filtered technical Sodium Alginate based Textile Printing Thickener designed
applying for printing with Reactive Dyes on cotton, and also for printing with Disperse / Reactive
dyes on Polyester / Blends.
---Printex LV is suitable for Rotary and Roller Printing.
Properties
---High colour yield and penetration
---good sharpne and levelne
---stable viscosity under high shear conditions
---excellent eash-off pro[erties
Product
---Appearance Yellowish to light brown powder
---Filter grade High purity
---PH 6.5---7.5
---Moisture 12% max
---Solubility Cold water
---Viscosity 30,000+/-3,000cps (8% solution)
Measured with Brookfild RVF, at 25 C, Spindle No.6, 20 RPM.
Application
---Printex LV can be combined in any retio with other Thickeners such as Modified Starch,CMC,
some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.
---Stock Thickening Preparation
Printex LV 8Kg
Water 92Kg
Stock Thickening 100Kgs
---Printex LV is added to water while stirring with high speed stirrer,which takes about 1-2 minutes
until the viscosity increases.
---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.
Remark: Printex LV diolves easy in cold water, if diolved in water with hardne of 12.5E, additional
of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution
should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)
Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.
Storage
---Should be stored in a dry and cool place to maintain best product performance.
Head Office: Dalian Yingqi Chemical (I/E) Co.,Ltd.
Add: 2 FL. No.2 Jingwei St.,Dalian,China 116001.
Tel: +86- 411- 82646472 (3 lines), Fax: +86-411-82805444
E-mail: yqchem@online.ln.cn yqhe@mail.dlptt.ln.cn http://www.ec21.com/yqchemPacking:25Kgs bag
Appearance: Brownish Powder
Stock Thickening Content Ratio: ca 4%
Fluidity: Long
Shear Stre Sensibility: Low
PH: 6.5---7.5
PH Range Stability: 5---10
Moisture: 12% approx.
Solubility: Cold Water Soluble
Filtered Grade: High Purity for Rotary Screen Printing
Ionic Character: Anionic
Sodium Alginate can be combined in any ratio with other Thickeners such as Printex ST, Printex C5, Ether Starch, CMC, British Gum, Guar Gum, Tamarind Gum, Synthetic Polymers etc depending on the quality of fabric and printing machine, as well as kinds of Dyestuff.
Packing: 25Kgs bag of net each.
Factory: Chem-Thickeners (Algin) Plant.
Textile Printing Thickener---Printex HV
---Printex HV is a high viscous, filtered technical Sodium Alginate based Textile Printing
Thickener designed applying for printing with Reactive Dyes on cotton, and also for printing
with Disperse / Reactive dyes on Polyester / Blends.
---Printex HV is suitable for Flat Bed Printing and Rotary Screen Printing.
Properties
---High colour yield and penetration
---good sharpne and levelne
---stable viscosity under high shear conditions
---excellent eash-off properties
Product
---Appearance Yellowish to light brown powder
---Filter grade High purity
---PH 6.5---7.5
---Moisture 12% max
---Solubility Cold water
---Viscosity 95,000+/-3,000cps (4% solution)
Measured with Brookfild RVF, at 25 C, Spindle No.6, 20 RPM.
Application
---Printex HV can be combined in any retio with other Thickeners such as Modified Starch,CMC,
some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.
---Stock Thickening Preparation
Printex HV 4Kg
Water 96Kg
Stock Thickening 100Kgs
---Printex HV is added to water while stirring with high speed stirrer,which takes about 1-2 minutes
until the viscosity increases.
---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.
Remark: Printex HV diolves easy in cold water, if diolved in water with hardne of 12.5E, additional
of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution
should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)
Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.
Storage
---Should be stored in a dry and cool place to maintain best product performance.
Textile Printing Thickener---Printex MV
---Printex MV is a medium viscous, filtered technical Sodium Alginate based Textile Printing
Thickener designed applying for printing with Reactive Dyes on cotton, and also for printing
with Disperse / Reactive dyes on Polyester / Blends.
---Printex MV is suitable for Flat Bed Printing and Rotary Screen Printing.
Properties
---High colour yield and penetration
---good sharpne and levelne
---stable viscosity under high shear conditions
---excellent eash-off pro[erties
Product
---Appearance Yellowish to light brown powder
---Filter grade High purity
---PH 6.5---7.5
---Moisture 12% max
---Solubility Cold water
---Viscosity 35,000+/-3,000cps (4% solution)
Measured with Brookfild RVF, at 25 C, Spindle No.6, 20 RPM.
Application
---Printex MV can be combined in any retio with other Thickeners such as Modified Starch,CMC,
some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.
---Stock Thickening Preparation
Printex MV 4Kg
Water 96Kg
Stock Thickening 100Kgs
---Printex MV is added to water while stirring with high speed stirrer,which takes about 1-2 minutes
until the viscosity increases.
---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.
Remark: Printex MV diolves easy in cold water, if diolved in water with hardne of 12.5E, additional
of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution
should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)
Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.
Storage
---Should be stored in a dry and cool place to maintain best product performance.
Textile Printing Thickener---Printex LV
---Printex LV is low viscous, filtered technical Sodium Alginate based Textile Printing Thickener designed
applying for printing with Reactive Dyes on cotton, and also for printing with Disperse / Reactive
dyes on Polyester / Blends.
---Printex LV is suitable for Rotary and Roller Printing.
Properties
---High colour yield and penetration
---good sharpne and levelne
---stable viscosity under high shear conditions
---excellent eash-off pro[erties
Product
---Appearance Yellowish to light brown powder
---Filter grade High purity
---PH 6.5---7.5
---Moisture 12% max
---Solubility Cold water
---Viscosity 30,000+/-3,000cps (8% solution)
Measured with Brookfild RVF, at 25 C, Spindle No.6, 20 RPM.
Application
---Printex LV can be combined in any retio with other Thickeners such as Modified Starch,CMC,
some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.
---Stock Thickening Preparation
Printex LV 8Kg
Water 92Kg
Stock Thickening 100Kgs
---Printex LV is added to water while stirring with high speed stirrer,which takes about 1-2 minutes
until the viscosity increases.
---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.
Remark: Printex LV diolves easy in cold water, if diolved in water with hardne of 12.5E, additional
of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution
should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)
Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.
Storage
---Should be stored in a dry and cool place to maintain best product performance.
Head Office: Dalian Yingqi Chemical (I/E) Co.,Ltd.
Add: 2 FL. No.2 Jingwei St.,Dalian,China 116001.
Tel: +86- 411- 82646472 (3 lines), Fax: +86-411-82805444
E-mail: yqchem@online.ln.cn yqhe@mail.dlptt.ln.cn http://www.ec21.com/yqchemPacking:25Kgs bag
Company Name:
Contact Person:
Address:
Zip:
Telephone:
Fax:
Homepage:
Contact Person:
Address:
Zip:
Telephone:
Fax:
Homepage:
Dalian Yingqi Chem Co.,Ltd.
He Rongchun
Rm508 (East),No.2, Xinglin St.,Dalian,China 116001
116001
86-411-82590651, 82593819
86-411-82556086
yqchem.en.ec21.com
He Rongchun
Rm508 (East),No.2, Xinglin St.,Dalian,China 116001
116001
86-411-82590651, 82593819
86-411-82556086
yqchem.en.ec21.com
